M32 Stopping Plug: Nickel Plated Brass, Dome Head, Exd/Exe



0 ITEM(S) IN YOUR CART / TOTAL: $0 VIEW CART

Subscribe to our Newsletter

Subscribe
Unsubscribe

Home>Fittings>Hazardous Location>Stopping Plugs

M32 Stopping Plug: Nickel Plated Brass, Dome Head, Exd/Exe

Part Number PD-U-1-1-06-00

M32 Stopping Plug: Nickel Plated Brass, Dome Head, Exd/Exe

E-mail a friend

Review this item

Price

Your Price:

$11.95

Quantity

Description

Exd/Exe Stopping Plug: M32 x 1.5, Nickel Plated Brass, Dome Head

Redapt's PD-U series of Stopping Plugs are used to seal unused cable gland or conduit entries in Ex approved enclosures, maintaining the hazardous location certification and the overall integrity of the installation.

Dome Head Stopping Plugs are designed to be installed with a hex (Allen) key from the outside of an enclosure. Supplied complete with a captive O-Ring seal located within a recess on the face of the fitting, this provides protection from environmental damage, ensures the O-Ring is not displaced during installation and optimizes ingress protection.

Certified to protection concepts Exd "Flameproof" and Exe "Increased Safety" for use in Zone 1 and Zone 2 applications, the Redapt PD-U series of Stopping Plugs are approved to the latest international standards. ATEX (CENELEC), IECEx and GOST-R hazardous area certificates are available. Additionally, CSA approval certificates can be supplied to cover use in North American and Canadian Class I, Division 1 and Class I, Zone 1 applications.

Dimensional Chart:

Thread Size	Dimensions in millimeters (mm)
Male Thread	A	B	DIA	A/F
Male Thread	Male Thread Length	Total Length	Head Diameter	Socket (Across Flats)
M32 x 1.5	16	21.5	38+	10

*Head Diameter is at minimum 6mm larger than the major thread diameter.

Technical Data Table:

Protection Method	Exd – Flameproof / Exe – Increased Safety
Ingress Protection Maintained	IP66 / IP67 / IP68 to a depth of 2 meters
Impact Resistance	20 Nm
Limiting Temperature Range	-20°C to 80°C w/ Nitrile O-Ring (supplied as standard) *Temperature ranges vary depending upon requested O-Ring material
Material	Brass CZ121
Plating	Nickel
O-Ring Material	Nitrile
Standards Approved To	IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1
CENELEC ATEX Approval	SIRA00ATEX1094X I M2, II 2 GD, Ex d I/IIC Mb Gb, Ex e I/IIC Mb Gb, Ex tb IIIC Db, IP6X
IECEx Approval	IECEx SIR 12.0016X Ex d I/IIC Mb Gb, Ex e I/IIC Mb Gb, Ex tb IIIC Db, IP6X
GOST-R Approval	RU ?-GB.??06.?00106 – Russian RU ?-GB.??06.?00106 – English RU ?-GB.??06.?00106 Annex Document – English
CSA Approval	1248014 (LR 106084-2) Ex de I & IIC IP66/67/68 Class I Zone 1 & 2 Groups A, B, C & D. Class I, Division 1 & 2; Groups A, B, C & D; Class II, Groups E, F & G; Class III; CSA Enclosure Type 4X/6P
Installation Instructions	English
Product Datasheet	Data Sheet - Metallic Dome Head Stopping Plugs

Looking for a different size or material? Other Ex fittings?
Please check out our line of Explosion Proof Fittings or call (888) 835-0868