1/8-27 Self Tapping Grease Fitting: Straight, Steel, Yellow Zinc

1/8-27 Self Tapping Grease Fitting: Straight, Steel, Yellow Zinc Plated

0 Review(s) Write a Review

Your Price: $0.28

Self Tapping Grease Fittings (a/k/a Thread Forming or Spin Drive Grease Fittings) have special tapered drive threads that allow the fitting to be screwed into a drilled hole, eliminating the need to tap.

Part Number: TTS1720

Availability: In Stock

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity	Price
300 - 2100	$0.28
2400	$0.25
2500+	$0.23

Description

Key Dimensional Data & Product Attributes:

Head Angle:	Straight	Material:	12L14 or 1215 Steel
Thread Size:	1/8-27	Finish:	Zinc Trivalent Clear
Thread Type:	SAE Thread Forming	RoHS Compliant:	Yes
Overall Length:	0.625" (15.9mm)	Brand:	Thread Tool Supply
Shank Length:	0.234" (5.9mm)	Country of Origin:	Colombia
Hex Size:	7/16"	Heat Treated:	83 min Rockwell 15N
Thread Form:	90°	Max Pressure:	8000 PSI
Ball Check Valve:	Yes	Salt Spray:	96hr to white (coating)
Industry Spec:	SAE J534		144hr to red (base metal)

Features:

Self-Tapping Grease Fittings are also known as Thread Forming or Spin Drive Grease Fittings. They have special tapered drive threads for fast and economical production line installation. Their special hardened threads allow the fitting to be screwed into a drilled hole, eliminating the need to tap. A leakproof and permanent seal is formed because the installation force causes the material of the untapped hole to reshape conforming to the fitting's own thread design.

Pro Tips:

Avoid chamfering the hole as a sharp edge helps the thread bite.
Use in heat-treated parts is not recommended.
Thread Forming fittings may be replaced by a 1/8-27 PTF tapered thread fitting or by another thread forming fitting because it can realign damaged threads in an existing hole.

Why Thread Tool Supply's Grease Fittings?

Our fittings are RoHS Compliant, Heat Treated, Zinc Plated, rated to 8,000 max PSI and made to meet or exceed the industry's DIN 71412 spec. Before our Grease Fittings ever leave the factory, they undergo vigorous inspection and performance controls including an automated infrared optical test to ensure proper assembly, an opening pressure test, lubricant leakage test and blowout test...qualities you may be hard pressed to find on low cost imports offered elsewhere.

Looking to make a switch? Compare to...

Alemite P/N:	1720-B
Umeta P/N:	5546052
Lincoln P/N:	205000

Grease Fittings are also referred to as Zerk Fittings, Grease Zerks, Lube Fittings, Grease Nipples or Alemite Fittings.

Available Options...

Material - 12L14 Steel (standard), 303/316 Stainless Steel, Monel 400, Brass CDA 360
Coatings - Zinc Trivalent Clear & Yellow available as standard

additional topcoats to further increase corrosion resistance available upon request

High Volume Orders...

In need of production quantity levels? Contact us for special pricing above 50,000 pcs!

Not the correct size? Looking for a different length, angle or finish?

For a comprehensive list of our Grease Fittings, please visit our summary page.

1/8-27 Self Tapping Grease Fitting: Straight, Steel, Yellow Zinc Plated

Quantity Pricing

Mailing List