0 ITEM(S) IN YOUR CART / TOTAL: $0
Shop by Category
Subscribe to our Newsletter
E-Z LOK Thread Inserts
E-Z LOK Thread Repair Kit: M8 x 1.25, Heavy Duty
Kit Includes: M8 x 1.25 Heavy Duty Inserts, Tap & Drill
E-mail a friend
Review this item
E-Z LOK Thread Repair Kit Includes:
HSS Plug Tap
E-Z LOK Thread Insert Specs:
M8 x 1.25
M12 x 1.75
Carbon Steel (12L14)
M12 x 1.75
Min. Full Thread Depth:
E-Z LOK Threaded Inserts are an ideal solution to repair stripped, damaged and worn threads or to provide thread reinforcement in a weaker parent material. They provide strong, permanent threads in a variety of housing materials including steel, aluminum, cast iron and magnesium.
Their external thread design provides maximum pull-out strength with a minimal outside diameter.
External threads are standard size and pitch to permit use of standard drills and taps. No special drills, taps, or installation tools are required!
E-Z LOK inserts will not back out or vibrate loose. Immediately upon installation, dry encapsulated Loctite begins to set and the newly installed insert part is fastener ready within minutes.
When fully cured at 72 hours, the Loctite seals against liquids and gases to pressures of 6,000 psi.
Not only has E-Z LOK made the installation process easy, they've done the same with the removal. Simply use a standard screw and bolt extractor to back out a damaged insert and then replace it with a new insert. Removal is just a matter of overcoming the resistance to torque-out which has been produced by the thread locking material.
Simple 1-2-3 Installation:
Drill hole with standard drill.
Tap hole with standard tap.
Install the insert - turn home the E-Z LOK with a screwdriver, bolt & jam nut, or E-Z LOK drive tool until flush with the top surface of the workpiece.
Available Options for our E-Z LOK Thread Inserts:
- Carbon Steel, 303 Stainless Steel
- Thin Wall, Heavy Duty Wall, Extra Heavy Duty Wall
For a comprehensive list of available options, please visit our
E-Z LOK Thread Insert
summary page or call us toll free at (888) 835-0868.
SAME DAY SHIPPING IF ORDERED BY 3PM CST.
You may be interested in...
E-Z LOK Thread Inserts: M8 x 1.25 ID, M12 x 1.75 OD, Heavy Duty, Carbon Steel (Pkg. of 5)
E-Z LOK Thread Inserts: M8 x 1.25 ID, M12 x 1.75 OD, Heavy Duty, 303 Stainless Steel (Pkg. of 5)
E-Z LOK Power Drive Tool: M8
M12 x 1.75 HSS Plug Tap
Z HSS Straight Shank Drill Bit
TERMS & CONDITIONS
W328S8900 S Oak Tree Dr
P.O. Box 504
Mukwonago, WI 53149 US