Male x Female Thread Reducer: Exd/Exe, ATEX, IECEx, GOST-R, CSA
Redapt's RD-U series of Reducers provide a method of matching electrical threadforms on hazardous area approved equipment. Ex approval maintains hazardous location certification and the overall integrity of the installation.
Manufactured from hexagon material to facilitate an easy installation, this Reducer will convert holes which fit size M32 x 1.5 male threads to a female 3/4" NPT threaded hub.
Supplied complete with a captive O-Ring seal located within a recess on the face of the fitting, this provides protection from environmental damage, ensures the O-Ring is not displaced during installation and optimizes ingress protection.
The RD-U series of Reducers are certified to protection concepts Exd "Flameproof" and Exe "Increased Safety" for use in Zone 1 and Zone 2 applications. Approved to the latest international standards, ATEX (CENELEC), IECEx and GOST-R hazardous area certificates are available. Additionally, CSA approval certificates can be supplied to cover use in North American and Canadian Class I, Division 1 and Class I, Zone 1 applications.
While designed for use within the hazardous locations present in oil, gas and petrochemical installations, Redapt's Thread Reducers are also commonly used in Industrial & Commercial applications providing a quick and easy solution when connecting to international components or machinery.
Dimensional Chart:
Thread Sizes
| Dimensions in millimeters (mm) | Male
Thread | Female
Thread | A | B | A/F | A/C | Male
Thread
Length | Total
Length | Hex
Across
Flats | Hex Across
Corners | M32 x 1.5 | 3/4-14 NPT | 16 | 26 | 37.6 | 43.2 |
Technical Data Table:
Protection Method
| Exd – Flameproof / Exe – Increased Safety | | Ingress Protection Maintained | IP66 / IP67 / IP68 to a depth of 2 meters
CSA Enclosure Type (NEMA) 4X 6P
| Impact Resistance
| 20 Nm
| Limiting Temperature Range
| -20°C to 80°C w/ Nitrile O-Ring (supplied as standard)
*Temperature ranges vary depending upon requested O-Ring material
| Material
| Brass CZ121 | Plating
| Nickel | O-Ring Material
| Nitrile
| Standards Approved To
| IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1
| CENELEC ATEX Approval
| SIRA00ATEX1094X
I M2, II 2 GD, Ex d I/IIC Mb Gb, Ex e I/IIC Mb Gb, Ex tb IIIC Db, IP6X
| IECEx Approval
| IECEx SIR 12.0016X
Ex d I/IIC Mb/Gb, Ex e I/IIC Mb/Gb, Ex tb IIIC Db, IP6X
| | GOST-R Approval | RU ?-GB.??06.?00106 – Russian
RU ?-GB.??06.?00106 – English
RU ?-GB.??06.?00106 Annex Document – English | CSA Approval
| 1248014 (LR 106084-2)
Ex de I & IIC IP66/67/68 Class I Zone 1 & 2 Groups A, B, C & D.
Class I, Division 1 & 2; Groups A, B, C & D; Class II, Groups E, F & G;
Class III; CSA Enclosure Type 4x/6P
| Installation Instructions
| English
| Product Datasheet
| Data Sheet - Metallic Adapters & Reducers
|
Looking for a different size or material? Other Ex fittings?
Please check out our line of Explosion Proof Fittings or call (888) 835-0868 |
|
