| 90° Elbow: M25 x 1.5 Male to M20 x 1.5 Female (ATEX Certified)
Redapt's AR-D series of 90°
Elbow Adapters are designed to allow a cable gland or conduit entry
where spacing or orientation makes a typical installation difficult,
maintaining hazardous location certification and the overall integrity
of the installation.
the "Elbow" design provides protection for the cable which may
otherwise be subjected to increased bending stress during installation.
The AR-D series of Elbows are certified to protection concepts
Exd "Flameproof" for use in Zone 1 and Zone 2
applications. Approved to the latest international standards, ATEX (CENELEC), IECEx and GOST-R hazardous
area certificates are available. Additionally, CSA approval certificates can be
supplied to cover use in North American and Canadian Class I, Division 1
and Class I, Zone 1 applications.
While designed for use within the hazardous locations present in oil, gas and petrochemical environments, Redapt's 90° Elbows are also commonly used in Industrial & Commercial applications in place of standard grade fittings.
Technical Data Table:
|Protection Method||Exd – Flameproof|
|Ingress Protection Maintained ||IP64|
|Impact Resistance||7 Nm|
|Limiting Temperature Range||-50°C to 180°C|
|Standards Approved To||IEC 60079-0, IEC 60079-1, IEC 61241-0, IEC 61241-1|
|CENELEC ATEX Approval||SIRA99ATEX1195U|
II 2 GD, Ex d IIC Gb, Ex tb IIIC Db, IP6X
|IECEx Approval||IECEx SIR 12.0016X|
Ex d IIC Gb, Ex tb IIIC Db, IP6X
RU ?-GB.??06.?00106 – Russian
RU ?-GB.??06.?00106 – English
RU ?-GB.??06.?00106 Annex Document – English
|CSA Approval||1248014 (LR 106084-2)|
Ex d IIC; IP54; Class I, Zone 1 & 2 Groups A, B, C & D.
Class I, Division 1 & 2; Groups A, B, C & D; Class II, Groups E, F & G;
Class III; CSA Enclosure Type 3
Data Sheet - 90 Degree Elbows
Looking for a different size or material? Other Ex fittings?
Please check out our line of Explosion Proof Fittings or call (888) 835-0868