Find us on Facebook

Follow us on Twitter

Home>Fittings>Hazardous Location>Breather Drains
M25 Exe Breather Drain: Glass Filled Nylon
Part Number DP-E-4-0-05-00-S3
M25 Exe Breather Drain: Glass Filled Nylon
M25 Exe Breather Drain: Glass Filled Nylon
E-mail a friend Review this item
Your Price:
Exe Breather Drain: M25 x 1.5, Glass Filled Nylon, w/ Castellated Locknut

Redapt's DP-E series of Breather Drain Plugs are used to allow the air inside an enclosure to breathe with the surrounding atmosphere and also to allow any moisture that enters the enclosure to drain.  Ex approval maintains hazardous location certification and the overall integrity of the installation.

Intended for use where an installation is subject to changes in temperature which can lead to the formation of condensation and a subsequent moisture build-up.

Designed to be installed from the outside of an enclosure, they can be used in a threaded or un-threaded entry hole ideally located at the lowest point of an enclosure to ensure optimum draining of any moisture.

The DP-E series of Breather Drains are certified to protection concept Exe "Increased Safety" for use in Zone 1 and Zone 2 applications.  Approved to the latest international standards, ATEX (CENELEC), IECEx and GOST-R hazardous area certificates are available.  Additionally, CSA approval certificates can be supplied to cover use in North American and Canadian Class I Zone 1 Exe II applications.