| Exe Breather Drain: 1/2" NPT, 316 Stainless Steel, w/ Castellated Locknut
|Redapt's DP-E series of Breather Drain Plugs are used to allow the air inside an enclosure to breathe with the surrounding atmosphere and also to allow any moisture that enters the enclosure to drain. Ex
approval maintains hazardous location
certification and the overall integrity of the installation.
Intended for use where an installation is subject to changes in temperature which can lead to the formation of condensation and a subsequent moisture build-up.
Designed to be installed from the outside of an enclosure, they can be used in a threaded or un-threaded entry hole ideally located at the lowest point of an enclosure to ensure optimum draining of any moisture.
The DP-E series of Breather Drains are certified to protection concept Exe
"Increased Safety" for use in Zone 1 and Zone 2 applications. Approved
to the latest international standards, ATEX (CENELEC), IECEx and GOST-R
hazardous area certificates are available. Additionally, CSA approval
certificates can be supplied to cover use in North American and Canadian
Class I Zone 1 Exe II applications.Dimensional Chart:
|Dimensions in millimeters (mm)|
Technical Data Table:
|Protection Method||Exe – Increased Safety|
|Ingress Protection Maintained ||IP66|
|Impact Resistance||20 Nm|
|Limiting Temperature Range||Dependent on filter and seal material|
|Material||316 Stainless Steel|
|Standards Approved To||IEC 60079-0, IEC 60079-7, IEC 61241-0, IEC 61241-1|
|CENELEC ATEX Approval||SIRA99ATEX3050U|
I M2, II 2 GD, Ex e I/II Mb Gb, Ex tb IIIC Db, IP66
|IECEx Approval||IECEx SIR 08.0024U|
Ex e I/IIC Mb Gb, Ex tb IIIC Db, IP66
RU ?-GB.??06.?00106 – Russian
RU ?-GB.??06.?00106 – English
RU ?-GB.??06.?00106 Annex Document – English
|CSA Approval||1185887-2500003408 (LR 106084)|
Ex d IIC; IP54; Class I, Zone 1 & 2 Groups A, B, C & D.
Class I, Division 1 & 2; Groups A, B, C & D; Class II, Groups E, F & G;
Class III; CSA Enclosure Type 3
Data Sheet: Exe Breather Drains
Looking for a different size or material? Other Ex fittings?
Please check out our line of Explosion Proof Fittings or call (888) 835-0868